Water & oil repellent, self-cleaning and pollution-removing of porous building materials
ProtectGuard Dtox is an innovative product which combines water-repellent, oil-repellent, anti-graffiti and pollution-removing properties.
ProtectGuard Dtox offers long-lasting protection against water, atmospheric pollution, grease-type staining, penetration of liquids and graffiti.
A material treated with ProtectGuard Dtox becomes virtually self-cleaning and will be easier to maintain
ProtectGuard Dtox uses photocatalytic action to remove pollutants present in outdoor air and breaks down organic pollution. Air is therefore purified.
ProtectGuard Dtox is a non film-forming impregnation product that leaves the treated surface permeable to air and water vapour.
ProtectGuard Dtox is completely colourless after application and does not change the appearance or the composition of the treated surface. It is also UV-resistant and does not discolor with age. ProtectGuard Dtox is applied outdoors on porous materials (stone, concrete, brick, rendering...). ProtectGuard Dtox is used for new and renovated constructions.
ProtectGuard Dtox offers longlasting protection against water, dirt, grease, graffiti and pollution. The combination of these properties and photocatalysis limit the build-up of grime on materials.
Under the action of UV light, tita nium dioxide is activated. It breaks down pollutants and organic contamination (pollution, exhaust fumes, moss, mould, grease....) Organic pollutants are then converted into water vapour and carbon dioxide.
Thanks to the product's water- and oil-repellent properties, dirt cannot cling to the surface and is washed off by the rain. Surfaces treated with ProtectGuard Dtox thus become self-cleaning.
5 and 30 litres.
Per 1 litre :
- Terracotta : 80 sq ft; 7 m²
- Concrete: 60 sq ft; 5 m²
- Renderinge : 30 sq ft; 2,50 m²
- Limestone : 20 sq ft; 2,00 m²
Average figures given for reference only. The actual quantity of product needed depends on the substrate’s porosity.